 |
|
|
|
Antique Vertical Clear Heart Cypress
/div>
Widths: 3”-8”
Lengths: 2’-12’ for flooring; 3’-12’
for paneling (longer lengths by availability)
Heart content: 100% heart faceGrades available:
Quarter sawn vertical pinstripe grain with rare pin knots |
|
Antique River-Recovered® Vertical Clear Heart Cypress features the same rich
patinas and fine pinstripe grain as the Vertical Heart Cypress. However, this
grade has only rare pinknots no larger than ½ inch.
Characteristics:
- Warm honey through cinnamon tan to light chocolate tones
- Fine delicate straight grain
- 100 percent vertical grain with no growth rings more than 45 degrees
to the face
- 100 percent heartwood
- At least 8 growth rings per inch
- Knots rare, no pin knots over ½”
- 690 on the Janka scale comparable to Douglas fir (660)
Dimensions
- Flooring and paneling, widths from 2-1/4” to 5-1/4””
face or custom
- Lumber, up to 2” x 6”
- Architectural Millwork is full thickness, e.g., Crown ¾”
x 5-1/2”
Milling
- Flooring is ordered by the square foot and is trimmed to provide
100 percent usable material for the grade. Standard lengths are random
from 1' - 12' and standard milling is tongue and groove in 'flooring
match' with more wood above the tongue, a back relief pattern and
a nail groove over the tongue to ease installation.
- Paneling standard lengths are 3' and longer and milling is available
in V-joint, Single-bead or Double-bead or custom.
- stair parts include handrail, treads, balusters, newels, newel caps,
stringers and risers and come in many antique patterns as well as
all standard ones.
- Architectural millwork is full dimension and is based on the 8000
series patterns last published in 1925. Goodwin offers a complete
line of mouldings including base, shoe, cover or scotia, crown, step,
picture, panel, thresholds, quarter round, casings, rosettes, picture
frame, reeded and more.
- Custom milling patterns and specific lengths are available for an
additional cost.
|
|
